saveFiberData2D command¶
- vfo.saveFiberData2D(ModelName, LoadCaseName, eleNumber, sectionNumber, deltaT=0.0)¶
This command saves the fiber output of the specified section in a non-linear beam-column element to a sub-folder named “LoadCaseName” inside the output database folder “ModelName_ODB”. This output data can be visualized using
plot_fiberResponse2D()
andanimate_fiberResponse2D()
commands.ModelName
(str)Name of the model the user wants to save database with.
LoadCaseName
(str)Name of the subfolder to save load case output data.
eleNumber
(int)Tag of the element with a fiber section assigned.
sectionNumber
(float)Tag of the section where the fiber response is to be recorded.
deltaT
(list)Timesteps at which output to be saved. Default is 0.0. (optional)
Here is a simple example:
vfo.saveFiberData2D("TwoSpan_Bridge", "Pushover", 101, 2)
The above command will:
create a folder named TwoSpan_Bridge_ODB and a sub-folder named Pushover if they are not already there.
save fiber response of the section with a tag 2 of the element with a tag 101 in the Pushover folder.